Three Dimensional Blender
Product Introduction
3D mixer, moves in 3D space to eliminate gravity segregation, stratification and aggregation caused by centrifugal effect, can deal with and mix a group of materials in rapidly and homogeneous. Taking into all-round performance of all kinds of mixers, 3D mixer is still an ideal mixer in nowadays and it is widely used in powder and particle mixing of pharmacy, chemical industry, food, light industry, mechanical, mining, national defense and other research and development institution.
【Materials Specific Gravity】:≤7g/cm³
【Production Capacity】:1-1,000L
【Application Industry】:Suitable for the material mixing of pharmacy, food, essence, chemical industry, plastic, rubber and etc. (more information please click FREE CONSULTATION)
【Applicable Materials】:Powders or particles with fluidity whose specific gravity is under 7g/cm³, liquid content is up to 10%, such as medical intermediate, flavoring, flour, essence, graphite, coffee powder, iron powder and etc.
Product Advantages
3D mixer is with a large loading coefficient, up to 80~90%(other mixer is around 40~50%)
3D mixer is with a reasonable structure, easy to feeding and discharging.
High uniformity, short mixing time and low energy cost.
Mixer is made of stainless steel with nice appearance which is easy to clean and move.
Arc angle at all the corners which are polished by complete process and ensure no discharge residual, no mixing dead zone and easy to clean.
Working Principle
As the multi-direction movements, materials are flowed and dispersed during operation without gravity segregation, aggregation nor mixing dead zone, so that, there is a good mixing result.
Structure: The mixer consists of rack, conveying system, electric control system, multi-direction movement mechanism, mixing cylinder and etc. The cylinder is made of stainless steel and inner and outer mirror polished.
Typical Case
3D mixer
The following picture is the customized 3D mixer for a famous international pharmaceutical manufacturer. It will be used in medicine powder mixing.
【Model】:SHYH
【Design Volume】:100L
【Products Characteristics】:1.high uniformity 2.low energy-cost 3.easy to clean
Technical Parameter
|
Model |
Design Volume (L) |
Max Loading Volume （L） |
Capacity (kg) |
Speed (rpm) |
Power (kw) |
Size（mm） |
Weight （kg） |
||
|
Length |
Wide |
Height |
|||||||
|
SHYH－1 |
1 |
0.8 |
0.5 |
15-30 |
0.12 |
500 |
600 |
600 |
50 |
|
SHYH－5 |
5 |
4 |
2.4 |
15-30 |
0.25 |
600 |
1000 |
1000 |
150 |
|
SHYH－15 |
15 |
12 |
7.5 |
15-30 |
0.37 |
700 |
1000 |
1000 |
200 |
|
SHYH－50 |
50 |
40 |
25 |
0－8 |
1.1 |
1000 |
1400 |
1200 |
200 |
|
SHYH－100 |
100 |
80 |
50 |
0－8 |
1.5 |
1200 |
1700 |
1500 |
500 |
|
SHYH－200 |
200 |
160 |
100 |
0－8 |
2.2 |
1400 |
1800 |
1600 |
800 |
|
SHYH－400 |
400 |
320 |
200 |
0－8 |
4 |
1800 |
2100 |
1950 |
1200 |
|
SHYH－600 |
600 |
480 |
300 |
0－8 |
5.5 |
1900 |
2100 |
2250 |
1500 |
|
SHYH－800 |
800 |
640 |
400 |
0－8 |
7.5 |
2200 |
2400 |
2300 |
2000 |
|
SHYH－1000 |
1000 |
800 |
600 |
0－8 |
7.5 |
2250 |
2600 |
2600 |
2500 |
* The above listed Max. processing capacity is calculated as per powder with specific gravity 1 as medium.The model selection should depend on the comprehensive factors such as
materials viscosity, specific gravity etc.
* If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection.
* The above data and picture is subject to change without notice. The accurate parameter should be subject to the object.
