Fluid Machinery
Viscous Slurry Machinery
Powder Machinery
Turn-key Project

Roof Dust Collector

Product Introduction

Roof dust collector is a kind of de-dusting equipment used in bins. It can be divided into bag-type and cartridge type. Roof dust collector is nowadays widely used in powder pneumatic conveying process and the filtration area are designed according to capacity, proportion of gas and powder, air pressure, air speed and etc parameters.

【Dust Concentration】:Inlet＜200g/m³，Outlet＜50mg/m³

【Filtration Area】:24~84㎡

【Application Industry】:Suitable for dust collect of food, paper making, metallurgy, pharmacy, environment protection, chemical industry, dye and etc industries. (more information please click FREE CONSULTATION)

【Applicable Materials】:All positions where there is raise dust, especially for power ex-proof factories and industries has high requirements to tail gas treatment, such as pigment, ceramic materials, aluminium oxide, quartz sand, food additive, metal powder, Chinese herbal medicine and etc.

Roof Dust Collector

Dust collector

Product Advantages

1. High efficiency, normally above 99% and the dust concentration is below tens of mg/m³, high resolution ratio to submicron fines.
2. Simple structure,, easy to operate, easy to change bags and long service life.
3. Connect hopper with flange and its global design makes it easy to transport and install.

Roof Dust Collector working principle

Working Principle

Roof dust collector is a removable metal filtration cylinder and consists of support frame, top cylinder, control cabinet, filtration bag/cartridge, sealed cylinder, protection grid, connection clamp, welding flange, sealing gasket and etc. Dust, carried by gases, are held up on filtration layer. Therefore, solid are separated from gases and the solid are stored in the collector at the bottom.

Typical Case

Roof dust collector
SIEHE provides reasonable dust collector for the powder turnkey. Pictures shows a bag-type center dust collector for a Chinese famous chemical industry’s chemical powder mixing plant.

【Blast Capacity】:bag-type filter
【Area】:24㎡
【Model】:SCCS

Roof Dust Collector typical case

Roof Dust Collector

Technical Parameter

Dust concentration: inlet＜200g/m³，outlet＜50mg/m³
Filtration area:24~84㎡

Related Cases
More
No data
Related Product
More

Bag-type Dust Collector

Bag-type dust collector is a dry dust filtering device. It is suitable to catch tiny, dry and not-fiber powder. The filter bag is made of woven or non-woven cloth, taking use of the fabric filtering function. When gas with a contain dust content goes in to bags, big particles fall to dust hopper as the gravity, and small ones stopped at the filtering cloth as its filtration of fabric, therefore, gas is cleaned.

Cartridge Type Dust Collector

Cartridge type dust collector is not only has the same advantages as the bag type dust collector of good soot cleaning effect, high efficiency and low emission, but also has the features of stable, low energy cost and small area, suitable to deal with the gas and ash-laden gas with large air quantity. It is widely used overseas, and now, it is also accepted by many Chinese companies.