Mid-batch horizontal bead mill

Product Introduction

Mid-batch horizontal beads mill is a Nano Grade liquid grinding machine for labs of collages and research institutes. Metering pump can be used to adjust the flow to gte the best grinding results. The device is controlled by PLC, all the materials temperature, materials pressure and electric current can be supervised and protected. Faults can be checked, therefore, it is easy to be maintenance. Grinding medium, tiny pure zirconia beads, are with high efficiency, good grinding fineness, wildly use and strong anti-wear. Mid-batch horizontal beads mill is most popular products for small batch materials.

【Material Viscosity】:≤10000 cps

【Production Capacity】:5-50L

【Application Industry】:Suitable for dispersing, grinding materials in a variety of applications such as biology, pharmacy, cosmetic, food, paint, ink, color paste, dyestuff, fertilizer etc.. (For more application industry, please click “Free Consultation”

【Applicable Materials】:good for Materials with viscosity less than 10,000cps and comparatively high requirements of final fineness, such as automobile paint, color paste, water-based ink, fertilizer suspension, lithium battery slurry etc.

Product Advantages

high efficiency, good final fineness
The main shaft in the grinding chamber is equipped with many pins with high anti-abrasiveness and hardness. The pins drive the grinding medium inside the grinding chamber to do irregular movements in all direction to put the materials under the action of constant collision and friction. 0.2-1.0mm YSZ beads are in option so that the final fineness could be under 1um or even nano grade.
Easy operation and intelligent control
HMI+PLC is used in the device with high-performance converter, temperature meters and pressure meters. All the data can be showed on digital screen, easy to operate. Put the materials to the inlet hopper manually and start the machine, self-circulate system will finish grinding work and ground materials will come out from outlet on the bottom of machine.
low temperature rise, stable products
Batching hopper and grinding cylinder are with cooling jackets. Cold water are injected into them during operation so that the temperature rise is normally less than 10º
 long life-time without metal pollution
The entire grinding chamber is made of zirconia which reduces the cost of component and metal pollution to large extent ,improves the device life-time. Therefore, the device can be used in products with is sensitive to metal irons.

Working Principle

The delivery pump circulates the materials in the tank and the materials in the grinding chamber. The main shaft in the grinding chamber is equipped with many pins with high anti-abrasiveness and hardness. The pins drive the grinding medium inside the grinding chamber to do irregular movements in all direction to put the materials under the action of constant collision and friction. At same time, the materials are separated from the grinding medium by the sieve and keep circulating from the tank to the grinding chamber to obtain smaller particle size, narrower particle size range.

Typical Case

mid-batch horizontal beads mill
The following picture is a mid-batch horizontal beads mill was exhibited at Achema2018 hold in Frankfurt, Germany..

【Materials】: water-base ink，5000 cps
【Capacity】: 20L/h
【Model】: SWZX-1.5

Technical Parameter