Horizontal drying mixer is a multi-function mixer combines mixing, reaction and drying, widely used in industries of food, chemical industries, building materials, lithium battery, etc., during the process of which the liquid needs to be added, and after mixing the liquid needs to be removed or the liquid content is too high so it needs to decrease. The machine is with heating jacket, which can heat the materials by hot water, hot oil, steam and other medium.
Horizontal ribbon mixer is a late-model mixing equipment with high efficiency, high uniformity, high loading coefficient but low energy cost, low pollution and low crush. The special design of double ribbon mix the materials into high uniformity in a few minutes. On the other hand, ribbon mixer shows a wide application from powder mixing , powder-liquid, to paste or materials in high specific gravity (such as putty, really stone paint, metal powder and other materials) and becomes one of the most popular single shaft horizontal mixing equipment.
Horizontal plough mixer is a Germany-technical late-model mixing equipment with high efficiency, high uniformity, high loading coefficient but low energy cost, low pollution and low crush. The agitator consists of multi-group of plough and fly-cutter which works together to mixing, smash, and dispersing materials. It is widely used in the mixing of powder=powder, powder-liquid and powder-particles, especially for the materials which may get aggregation during mixing. Liquid can be sprayed into powders. Vacuum system and drying system are also in option.
Horizontal non-gravity mixer is a Korean-technical late-model mixing equipment with high efficiency, high uniformity, high loading coefficient but low energy cost, low pollution and low crush. Agitators, designed in special angle, rotates in same but opposite direction and shows a nice mixing, smashing, dispersing results. It is widely used in powder-powder, powder-liquid, powder-particles mixing. It is also able to used for materials in different specific gravity and particles in a wide range of sizes.
This machine is suitable for powder-powder, powder-granule, powder-liquid mixing. Agitators, with a special design in different type (blade, plough, ribbon, etc.) are mounted inside the round, U-shape or O-shape working chamber, materials are fed into the inlet on one end, get mixed inside the chamber and discharge from the outlet on the other end. Normally the materials will stay in the mixer for around 30-120S to implement continuous feeding and discharging.
Horizontal drying mixer is a multi-function mixer combines mixing, reaction and drying, widely used in industries of food, chemical industries, building materials, lithium battery, etc., during the process of which the liquid needs to be added, and after mixing the liquid needs to be removed or the liquid content is too high so it needs to decrease. The machine is with heating jacket, which can heat the materials by hot water, hot oil, steam and other medium.
Nauta mixer is a late-model mixing equipment with high uniformity, low energy cost, low residue and low crush. There are two asymmetric spiral shafts, with their self-rotation and revolution, materials are lifted repeatedly to finally realize the purpose of well-mixed. It is one of the earliest developed products and till now, it is widely used to mix powder-powder and powder-liquid, especially for fine powder, fiber and slice materials.
Vertical conical ribbon mixer has advantages of good mixing performance, easy to discharge etc. Spray device, heating devices, lifting devices and drying devices are for option. Materials are lifted repeatedly, mist-spraying device uniformly sprays the liquid onto the solid materials, so that they will be well mixed. If this mixer is equipped with heating device then it will become an ideal drying machine.
V-shape mixer is mainly used for powder-powder mixing, especially for materials in small batch and has high uniformity requirement. The cylinder is rotatable. The mixing process is divided into stop & feeding, start & mixing, stop & discharging, etc. Vacuum feeding device can be equipped.
Double cone mixer is mainly used in powder-powder mixing, especially for materials in small batch and has high uniformity requirement. The equipment adopts W structure and cylinder is rotatable. The mixing process is divided into stop & feeding, start & mixing, stop & discharging, etc. Vacuum feeding device can be equipped.
3D mixer, moves in 3D space to eliminate gravity segregation, stratification and aggregation caused by centrifugal effect, can deal with and mix a group of materials in rapidly and homogeneous. Taking into all-round performance of all kinds of mixers, 3D mixer is still an ideal mixer in nowadays and it is widely used in powder and particle mixing of pharmacy, chemical industry, food, light industry, mechanical, mining, national defense and other research and development institution.